FOB: Midwest Warehouse
Lead time: 3 weeks
NOTE: Conveyor supports shown are optional and not included in the price.
$50.00 Minimum Order
Roach's Light Duty Line Shaft Driven Live Roller has gained widespread usage with its unique design. Curves, spurs, and a number of accessories may be driven by a single drive.
Specifications:
Tread Rollers
– 1-3/8" Diameter x 18 ga. galvanized steel.
– Model 138G with 5/16" hex, grooved.
Drive Belt
– 1/8" dia. polyurethane belts.
– Nominal 10 lbs. per roller drive.
Drive Shaft
– 1" diameter C1018 cold rolled steel shaft.
Couplings
– Couplings located both ends (type A), one end only (type B or C) or non (type D).
Center Drive
– Reversible drive; located approx. 18" inches from end of bed section for 3" inch and 6" inch RC.
– 16.5" for 4" RC
Bed
– 7" x 1.5" x 12 ga. formed steel channel frame.
– Bed sections attached with splice plates and floor supports.
Speed
– 60 FPM, constant
Bearings
– Precision, lubricated ball bearing units with composite housings.
Motor Drive
– 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
Roller Chain
– Drive shaft is driven by No. 50 chain.
– Chain take up provided on motor base.
Capacity
– See Technical Section for load capacity rating.
- Tread Rollers: 1-3/8" dia. x 18 gauge galvanized steel, model 138G with 5/16" hex, grooved.
- Drive Belt: 1/8" dia. polyurethane belts. Nominal 10 lbs. per roller drive.
- Drive Shaft: 1" diameter C1018 cold rolled steel shaft.
- Couplings: Couplings located both ends (type A), one end only (type B or C) or none (type D).
- Center Drive: Reversible drive; located approx. 18" inches from end of bed section for 3" inch and 6" inch RC; 16-1/2" for 4" RC
- Bed: 7" x 1-1/2" x 12 gauge formed steel channel frame. Bed sections attached with splice plates and floor supports.
- Speed: 60 FPM, constant.
- Bearings: Precision, lubricated, ball bearing units with composite housings.
- Motor Drive: 1/3 HP, 230/460/3, 60 cycle, TEFC right angle gear motor.
- Roller Chain: Drive shaft is driven by No. 50 chain. Chain take up provided on motor base.
- Capacity: Contact Material Flow for more information.
- Electrical Controls: Optional.
All of Roach's pre-engineered line can easily be adapted to special application needs. The basic unit has already been engineered and can often be shipped quickly.
If you need a large quantity of this product, call us at 1-800-338-1382 for additional bulk discounts!
